Deodata Marino Curtain Holdbacks June 27th, 2018 - 14:51:15
Curtain rods have come a long way as they have shed their simplicity to adopt a gorgeous look. Now you dont need to hide your drapery rods with the draperies or valance anymore. There is an array of curtain rods are waiting for you to choose from. A nicely done window treatment is gong to contribute a lot to your interior. The idea seems so simple; however you still can pay a little more attention to find out the right type of curtain panels and rods that matches up aesthetically with the rest of the interior. A little research in the internet proves worthy. You will be amazed at the designs styles and sizes of the curtains rods that are easily accessible in the market. There are drapery traverse decorative spring tension or sash swing arm wide traverse-and-valance magnetic curtain rods etc.
For a mitered curtain rod with one corner you will to provide three numbers: the angle and the lengths of the two rods. Confirm with your fabricator that he or she will make the appropriate subtractions for the bracket projection. This ensures that your rod will fit the corner correctly. If you have two corners you will need to provide the lengths of the three rods and the two angles. If you have a symmetrical bay window for example the angles should be close to the same. The more corners you have the more lengths and angles you will have to find. Different fabricators will provide different methods of connecting the rods. So check with your fabricator. Sometimes special brackets will be needed. Lastly choose your finials wands holdbacks and rings if needed.
The major reason for this is due to the environment within a bathroom setting plastic is a much more durable product and can be coated with a number of different protective materials that both wooden and metal cannot to help fight the ongoing damage of the constantly damp conditions in the bathroom. However do not be weary in terms of finding a style or design if you decide plastic is the only way to go; as there are plenty to choose from. The one thing plastic rings lack however are detailed engraving and designs that many metal rings and wooden rings possess.
If they will not be going all the way to the floor then they should hit about six inches below the window for full coverage of the window. Measure where the wrought iron curtain rods should be mounted based on the measurements of your curtains. Using a power drill mount the brackets directly into the wood stud within that four inch area on either side of the window. This will be the most difficult part of the process. Once the brackets are installed it is just a matter of putting the rod where it fits into the brackets and installing the finials if any to the ends of the rods.